Copper and aluminum row processing machines, multi-station bus Machine DHY-150, DHY-200 





 This machine is the light of foreign advanced products, and combined with the actual order to improve efficiency and ensure the operational safety requirements and equipment design. 
 Most suitable for making large-scale transmission and distribution electric control boxes and construction works on site. 
 High flexibility, small size and strong function, high production capacity and efficiency. 
 Low-noise sound, beautiful finished products will work without environmental pollution. 
 In addition to 4 in 1 (flat, vertical bending, punching, shearing) 3m outside the control valve to increase the other can complete crimp tubing, cut the cable or embossing, etc., to achieve more than one machine. 

 Triple busbar processing machines DHY-150 

 Features: cutting (CWC-150 or CWC-150V), punching (CH-60), flat bend (CB-150D or CB-200A) form 

 Flow table size: 850mm (length) × 650mm (width) × 1200mm (H) 

 Input voltage: single 50HZ, 220V 

 Rated operating oil pressure: 700kgf/cm2 (high pressure safety valve setting) 10000 (Psi) 

 Cut row machine output: 20ton 

 Row range of cut (mm): copper and aluminum row of ≤ 150 × 12 

 Curved row of machine output: 20ton 

 Flat bend range (mm): copper and aluminum row ≤ 150 × 12 

 Horizontal bending angle: 0 ° -135 ° 

 Punching machine output: 31ton 

 Hole in the side to row distance: 95mm/110m 

 Standard package punching mold: punch Φ7mm, Φ9mm, Φ10.5mm, Φ13.8mm, Φ17mm, Φ20.5mm 

 Weight: 170kg 


 Triple busbar processing machines DHY-200 

 Features: cutting (CWC-200 or CWC-200V), punching (CH-70), flat bend (CB-200A) form 

 Flow table size: 850mm (length) × 650mm (width) × 1200mm (H) 

 Input voltage: single 50HZ, 220V 

 Rated operating oil pressure: 700kgf/cm2 (high pressure safety valve setting) 10000 (Psi) 

 Cut row machine output: 30ton 

 Row range of cut (mm): copper and aluminum row of ≤ 200 × 13 

 Curved row of machine output: 30ton 

 Flat bend range (mm): copper and aluminum row ≤ 200 × 13 

 Horizontal bending angle: 0 ° -135 ° 

 Punching machine output: 35ton 

 Hole in the side to row distance: 95mm/110m 

 Standard package punching mold: punch Φ7mm, Φ9mm, Φ10.5mm, Φ13.8mm, Φ17mm, Φ20.5mm 

 Weight: 195kg